This is regular T3, the Sigmapharma brand, which you said you've also used.Thanks for the input. Is that regular T3 or sustained release?
This is regular T3, the Sigmapharma brand, which you said you've also used.Thanks for the input. Is that regular T3 or sustained release?
This is regular T3, the Sigmapharma brand, which you said you've also used.
Mine either. Didn't move it a single point. Up to 30mcg per day time release compounded.FWIW - T3 only did not change my SHBG.
Thanks for the data. I plotted some results:... I get labs done at least like 5 times per year, and was on cyp for quite a while
Thanks for the data. I plotted some results:
View attachment 8510
Unfortunately there's not a good linear trend—too much inconsistency, with very different doses providing similar free and total testosterone (8/24, 1/25) (10/23, 2/20). The inconsistencies extend to estradiol, with the value on 10/23 seemingly completely out of place. I have no explanations for these. Without a clear linear dose-response I can't make reasonable predictions to compare to your propionate measurements.
On the plus side, the free estradiol test continues to agree very well with the calculated values when the non-sensitive total E2 test result is used:
View attachment 8511
The trend line indicates that the non-sensitive E2 test very consistently reads about 16% high. As is typical, the sensitive total E2 test has thrown out at least one completely inconsistent number (7/9).
I'm glad you posted this.I would have been skeptical of this blend idea previously, but now that I have more experience with daily propionate I'm warming up to it. Somewhat unexpectedly my testosterone numbers on propionate are showing more variation than I actually want, around +/-40% from the mean. If the idea is to mimic diurnal variation in young men then +/-20% should be the goal.
I've found that when propionate is involved the lab work is difficult to interpret. A solution I use is to estimate what average serum testosterone should be based on previous measurements when levels were static, i.e. with frequent enanthate/cypionate injections. From this you can tell where the trough is relative to the average, and estimage that the peak is a similar amount above the average.I'm glad you posted this.
ive run:
propionate only EoD
propionate only ED
propionate and cyp 40%/60% EoD
with blood work done for all protocols.
It was quite surprising the clearance rate i have for the propionate.
Even running micro doses ED the variation in the numbers was more than i desired ( as you have noted for yourself also with prop usage.)
for myself, prop only protocol doesnt seem ideal.
I'll move to a 20% prop/80%cyp protocol using ED and Eod pinning, and get the bloods done.
Ive a feeling that 20/80 (prop/cyp) is going to be about spot on for me personally.
I'm glad you posted this.
ive run:
propionate only EoD
propionate only ED
propionate and cyp 40%/60% EoD
with blood work done for all protocols.
It was quite surprising the clearance rate i have for the propionate.
Even running micro doses ED the variation in the numbers was more than i desired ( as you have noted for yourself also with prop usage.)
for myself, prop only protocol doesnt seem ideal.
I'll move to a 20% prop/80%cyp protocol using ED and Eod pinning, and get the bloods done.
Ive a feeling that 20/80 (prop/cyp) is going to be about spot on for me personally.
Can you share your labs and the variations from these protocols pleaseI'm glad you posted this.
ive run:
propionate only EoD
propionate only ED
propionate and cyp 40%/60% EoD
with blood work done for all protocols.
It was quite surprising the clearance rate i have for the propionate.
Even running micro doses ED the variation in the numbers was more than i desired ( as you have noted for yourself also with prop usage.)
for myself, prop only protocol doesnt seem ideal.
I'll move to a 20% prop/80%cyp protocol using ED and Eod pinning, and get the bloods done.
Ive a feeling that 20/80 (prop/cyp) is going to be about spot on for me personally.
25 mg TE * 72% T_in_TE = 18 mg T
20 mg TP * 83.7% T_in_TP = 16.7 mg T
Pretty close, but it actually takes about 21.5 mg TP to equal 25 mg of TE.
69mg of testosterone per 100mg of cyp is what is usually listed onlineHey! Any chance you know how much Cypionate have in 100mg?
thnx in advance
Thnx a lot!!!69mg of testosterone per 100mg of cyp is what is usually listed online
It's closer to 70 mg (69.9).Hey! Any chance you know how much Cypionate have in 100mg?
thnx in advance
Are you still on prop? How are you doing with it?100mg per ml it’s only 10 units on a diabetic syringe. Not sure how you could possibly inject less. It’s a tiny amount
Are you still using prop? Curious...thinking about giving it a try.Wow, so there goes my theory about low SHBG guys having a hard time with propionate due to them clearing testosterone too quickly.
So it’s a little early for me to tell for sure, as I’ve only done 2 injections of prop so far, but seems that Empower’s prop is definitely giving me some PIP. It’s not too bad, but a little annoying. Nothing that would make me discontinue using it or anything. I’m injecting 35mg EOD into my outter thighs.
I had that same problem, when I add deca to my TRT, even at 10mg a day.I am not. I had some side effects with it that made it a no go. The main side effect it caused with me was pins and needles in my hands like carpal tunnel. Dr Saya had an explanation but I don’t remember what it was. Also I have no desire to do daily dosing with anything.
I certainly did. E2 was considerably lowered as well using prop.@sh1973 - Did you find that prop caused less water retention than cypionate? That seems to be prop’s reputation in the supra-physiological world of bodybuilding, but I have no idea about the science behind it.