You would need the TT, SHBG and the Albumin to be able to calculate the FT in the first place.say Total Test is 800 ng/dl and FT is in pg/ml?
thanks for replying. I'm asking as I'm doing more and more reading, I see that in the studies and also by watching some videos, Total testosterones is always mentioned.You would need the TT, SHBG and the Albumin to be able to calculate the FT in the first place.
Tru-T calculator
YouTube isn’t a good place to get accurate information, content creators need views to get compensation. None of the above quote is true for everyone, it’s a generalized statement with no real accuracy.Example, in a video I just watched, it was said that to build muscle we need at least 750 to 800 of TT, and going over 1000 may potentially pose some health risk on the long term.
You have to experiment and find out what works for you. I know this is tough to hear, but TRT doesn’t work for everyone.My SHBG is low, so this ratio is screwed up, if I would go by TT my FT would need to go way above reference range, so I believe I should go for a FT range rather than TT range, does it make sense?
The calculation is correct, but the units remain the same, so it's 16 ng/dL. Multiply by 10 to get pg/mL—160 pg/mL. However, don't expect sensible comparisons with some lab tests. The direct immunoassay tests in particular are inaccurate and their reference ranges usually have little connection to actual hormone concentrations.I'm understanding that let SHBG alone, free testosterone should be 2% of total, how do we calculate that? let's say Total Test is 800 ng/dl and FT is in pg/ml? 800 x 0,02 = 16?
You are correct. Free testosterone's fraction of total is not particularly meaningful. Concentrate on free testosterone—either measured accurately by equilibrium dialysis or else calculated using the Vermeulen method. A healthy target range for the latter is about 10-20 ng/dL....
My SHBG is low, so this ratio is screwed up, if I would go by TT my FT would need to go way above reference range, so I believe I should go for a FT range rather than TT range, does it make sense?
You would need the TT, SHBG and the Albumin to be able to calculate the FT in the first place.
Tru-T calculator
Thank you for the honest appraisal. A couple more days I will have some data to share. I hope you are well.For the time being, would not even waste your time trying to push this on here!
I'm understanding that let SHBG alone, free testosterone should be 2% of total, how do we calculate that? let's say Total Test is 800 ng/dl and FT is in pg/ml? 800 x 0,02 = 16?
thanks, indeed looking at my labs (LabCorp) I have always tested FT with direct method, the scale is 8.7 - 25.1 pg/ml. Understanding this is not the most accurate. how do I fit in in this scale 160 pg/ml? which should be the 2% of 800 ng/dl of TT? just divide by 10?The calculation is correct, but the units remain the same, so it's 16 ng/dL. Multiply by 10 to get pg/mL—160 pg/mL. However, don't expect sensible comparisons with some lab tests. The direct immunoassay tests in particular are inaccurate and their reference ranges usually have little connection to actual hormone concentrations.
You are correct. Free testosterone's fraction of total is not particularly meaningful. Concentrate on free testosterone—either measured accurately by equilibrium dialysis or else calculated using the Vermeulen method. A healthy target range for the latter is about 10-20 ng/dL.
thank youLook over this thread!
Testosterone fractions in blood?
what is the typical % ranges for SHBG and albumin in regards to testosterone fractions in the blood? The image is one examaple but Every source I come accross says a different thing. We know that 98% is bound. 2% is free... of course the amount bound (SHBG/albumin) is going to be user specific...www.excelmale.com
In my opinion the direct test is so inaccurate that it should be ignored. Most of my Labcorp panels have included this test, so I've been able to compare it to calculated free testosterone by plotting against dose. The results are expected to be linear. The calculated free testosterone values, both Vermeulen and Tru-T, appear quite linear, with R^2 greater than 0.9. The direct test performs relatively poorly, with R^2 about 0.5.thanks, indeed looking at my labs (LabCorp) I have always tested FT with direct method, the scale is 8.7 - 25.1 pg/ml. Understanding this is not the most accurate. how do I fit in in this scale 160 pg/ml? which should be the 2% of 800 ng/dl of TT? just divide by 10?
In my opinion the direct test is so inaccurate that it should be ignored. Most of my Labcorp panels have included this test, so I've been able to compare it to calculated free testosterone by plotting against dose. The results are expected to be linear. The calculated free testosterone values, both Vermeulen and Tru-T, appear quite linear, with R^2 greater than 0.9. The direct test performs relatively poorly, with R^2 about 0.5.
If you're determined to make the comparison then I seem to recall that @readalot has posted a conversion factor.
See Parts I and II (thread attached)Public Service Announcement: "Piss Poor" Direct RIA fT measurement (HELP is on the way)
Hey Folks, thought I would update the graph for free T reference ranges based on LC-MS/MS+ED and compare with Labcorp's direct RIA fT reference range. What the hell do you do with with your direct fT measurement if you want to compare with equibrium dialysis reference ranges? Take the Labcorp...www.excelmale.com
I'll have a recent example soon.